WVITY-01

Installation Instructions

  1. Open ‘software’ folder or Dropbox link
  2. Once all the files are downloaded from the link, place “EZCar.conf and EZcar.gz files on USB flash drive. (128MB or higher flash drive recommended)
  3. Power on WVI-X module, wait for unit to BOOT up and display CRUX logo.
  4. Plug the Usb flash drive, the update process will begin in 5-10 seconds and update the software automatically.
  5. Once the update is completed the WVI-X it will power off and power on.
  6. Uplug the USB flash drive after software update.

******** please note: Don’t power off during the software updating process.