1. 1. Download the zipped file and locate the zipped folder that you want to unzip (extract) files or folders from.
2. 2. To unzip a single file or folder, open the zipped folder, then drag the update.img file  from the zipped folder to a new location.
3. 3. Need a compatible usb preferably < 32 GB, format to FAT32
4. 4. Select the update.img file and save it on your USB thumb drive preferably with no other files so device can read the file.
5. 5. Connect the ACP-WLX module to a vehicle, aftermarket radio, or a charger and wait till the LED lights are lit up.
6. 6. Insert the USB to the appropriate USB A port on the ACP-WLX module
7. 7. The ACP-WLX module will update automatically
8. 8. This process can be confirmed by waiting till all the LED’s flash quickly while the device is updating and becomes solid once its finished updating.
9. 9. Unplug the USB to the ACP-WLX module and reconnect the ACP-WLX  to vehicle or aftermarket radio.

******** please note: Don’t power off during the software updating process.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Onetake Flasher.
• Insert the Software bin file. If the file is loaded correctly the file list will appear.
• Connect interface to PC via mini usb, once loaded select “Insert”
• The file will automatically update
• Download counting number will increase by 1 number if your update procedure is properly finished

• Download CRUX-Onetake Flasher.
• Depending on your windows driver select & install either  “Windows 32bit” or “windows 64bit”
• Run Crux  “Navitech update tool.exe”
• Click “Auto update”.
• CRUX update tool will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Onetake Flasher.
• Insert the Software bin file. If the file is loaded correctly the file list will appear.
• Connect interface to PC via mini usb, once loaded select “Insert”
• The file will automatically update
• Download counting number will increase by 1 number if your update procedure is properly finished

• Download CRUX-Onetake Flasher.
• Depending on your windows driver select & install either  “Windows 32bit” or “windows 64bit”
• Run Crux  “Navitech update tool.exe”
• Click “Auto update”.
• CRUX update tool will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Onetake Flasher.
• Insert the Software bin file. If the file is loaded correctly the file list will appear.
• Connect interface to PC via mini usb, once loaded select “Insert”
• The file will automatically update
• Download counting number will increase by 1 number if your update procedure is properly finished

• Download CRUX-Onetake Flasher.
• Depending on your windows driver select & install either  “Windows 32bit” or “windows 64bit”
• Run Crux  “Navitech update tool.exe”
• Click “Auto update”.
• CRUX update tool will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

• Download the latest firmware.
• Open CRUX-Flasher.
• Connect interface to PC, once loaded click “List Devices”
  • Interface Product ID will show up in display window.
• Click “Browse” and select firmware BIN file.
• Click “Flash”, wait for “update successful”.
• Click “Exit and disconnect interface module.

• Download CRUX-Flasher.
• Click “lch stimme zu”.
• Double-click “setup.exe”.
• Click “Install”.
• CRUX-Flasher will open.

*Only Compatible with Windows.

Detailed Installation Instructions.

1. Open ‘software’ folder or Dropbox link
2. Once all the files are downloaded from the link, place “EZCar.conf and EZcar.gz files on USB flash drive. (128MB or higher flash drive recommended)
3. Power on WVI-X module, wait for unit to BOOT up and display CRUX logo.
4. Plug the Usb flash drive, the update process will begin in 5-10 seconds and update the software automatically.
5. Once the update is completed the WVI-X it will power off and power on.
6. Uplug the USB flash drive after software update.

******** please note: Don’t power off during the software updating process.

1. Open ‘software’ folder or Dropbox link
2. Once all the files are downloaded from the link, place “EZCar.conf and EZcar.gz files on USB flash drive. (128MB or higher flash drive recommended)
3. Power on WVI-X module, wait for unit to BOOT up and display CRUX logo.
4. Plug the Usb flash drive, the update process will begin in 5-10 seconds and update the software automatically.
5. Once the update is completed the WVI-X it will power off and power on.
6. Uplug the USB flash drive after software update.

******** please note: Don’t power off during the software updating process.