SWRGM-49S | Radio Replacement Interface with Steering Wheel Control Retention for GM IOS, IOT, IOU Vehicles 2019 - Up

New

SWRGM-49S | Radio Replacement Interface with Steering Wheel Control Retention for GM IOS, IOT, IOU Vehicles 2019 – Up

SKU: 15884cd6c615-1-1

In stock

The CRUX SWRGM-49S is a Radio Replacement interface for select General Motors vehicles 2019 - Up that use a 56 pin connector. It facilitates the integration of an after-market radio to retain factory features in GM IOS, IOT, or IOU bus vehicles. This enhanced interface is also pre-programmed for retention of steering wheel controls.

Compare

Add to wishlist

Features

– Retains chime functions.
– Pre-programmed to retain factory Steering Wheel Controls
– RAP (Retained Accessory Power).
– Provides illumination, parking brake, reverse, and speed sense outputs.
– Made for non-amplified vehicles or vehicles that will have their amps bypassed

Note:

– Does not retain Bose amplifier.
– Does not retain OnStar.

Compatibility

CADILLAC
2019 – UP XT4

CHEVROLET

2019-2023 Blazer*
2019-2023 Camaro*

2019-2021 Cheyenne
2019-2022 Colorado
2019-2023 Equinox*
2019-2022 Malibu*
2019-2021 Silverado*

2020-2022 Traverse*
2019 Volt

GMC
2020-2022 Acadia*
2019-2022 Canyon
2019-2021 Sierra 1500*
2019-2022 Terrain*

NOTE:

Compatible with the following radio codes: IOS, IOT, or IOU
Note: The radio code can be found in the Glove Box.
Note: Newer model GM vehicles are now using a QR code label. If the Service Parts Identification Label is not located in the Glove Box, reference the Vehicle Certification Label on the driver’s door jamb opening for the QR code.